1. Sharifi, H., Nourian, P., Wick, C. D., and Rahman, M.S., 2025, “Multiscale Computational Approach for Capturing the Effect of Microstructural Heterogeneity on the Mechanical Response in Cu-Ni-Cr Alloy,” Journal of Materials Engineering and Performance, 2026. https://doi.org/10.1007/s11665-026-13361-9.
2. Sarker, P., Rahman, M.S., Chakravarty, U.K., 2025,”Vibration and Optimal Control of a Composite Helicopter Rotor Blade,” Vibration, 2026, 9(1):4. https://doi.org/10.3390/vibration9010004.
3. Rahman, M.S., Nourian, P., Kabhi, A. A., Siddiquee, M. A., Yasmin, M., Alam, C.S., Lee, H., Zeng, C. S., Murray, E., Weiss, L., Sarker, P., and Moore, A. L., 2025, “Current Progress and Emerging Trends in Additive Friction-Stir Deposition: Experimental Insights and Computational Modeling of Process, Material, and Performance,” Additive Manufacturing, manuscript under preparation.
4. Alam, C.S., Karami, V., Guo, S., Rahman, M.S., 2025, “Thermo-Mechanical Response of Aluminum Alloy in the Additive Friction Stir Deposition Process”, Additive Manufacturing Letters, January 2025, 12, p. 100263. [link]
5. Rahman, M.S., Alam, C.S., Pulok, M.K.H., Zeng, C., Chakravarty, U.K., 2024, “An Investigation of Tensile, Fatigue, and Fracture Behavior of 3D-Printed Polymers”, ASME Journal of Engineering Materials and Technology, January 2025, 147(1), 011001. [link]
6. Rahman, M. S., Sattar, N. S., Ahmed, R. U., Ciaccio, J., and Chakravarty, U. K., 2024. “A Machine Learning Framework for Melt-Pool Geometry Prediction and Process Parameter Optimization in the Laser Powder-Bed Fusion Process.” ASME Journal of Engineering Materials and Technology, 146(4): 041006. [link]
7. Honu, E., Guo, S., Rahman, M.S., Zeng, C., and Mensah, P., 2024, “Advancing Hydrogen Gas Utilization in Industrial Boilers: Impacts on Critical Boiler Components, Mitigation Measures, and Future Perspectives,” Hydrogen, 5(3), 574-623. [link]
8. Rahman, M.S., Schilling, P. J., Herrington, P. D., and Chakravarty, U. K., 2021, “A Comparison of the Thermo- Fluid Properties of Ti-6Al-4V Melt Pools Formed by Laser and Electron-Beam Powder-Bed Fusion Processes,” ASME Journal of Engineering Materials and Technology, 143(2), pp. [link]
9. Pulok, M.K.H., Rahman, M.S., and Akanda, M.A.S., 2020, “Numerical Analyses of Stress and Deformation in Sandwich-Structured Composites,” The Journal of Strain Analysis for Engineering Design. 2021;56(6):339-358.[link]
10. Rahman, M.S. and Chakravarty, U.K., 2019, “Design and Analyses of a Hybrid Solar and Vibration Energy Harvester,” Energy Harvesting and Systems, 6(3-4), pp. 39–55. [link]
11. Rahman, M.S., Schilling, P. J., Herrington, P. D., and Chakravarty, U. K., 2019, “Thermo-fluid Properties of Ti- 6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing,” ASME Journal of Engineering Materials and Technology, 141(4), pp. 041006-1–12. [link]

1. Radif Uddin Ahmed, Iftesam Nabi, Chowdhury Sadid Alam, and M Shafiqur Rahman, 2024, “Advancing Additive Repair: A Novel Framework Using Point Cloud Data and Surface Reconstruction,” Proceedings of Louisiana EPSCoR RII LAMDA 2024 Symposium, Baton Rouge, Louisiana, USA.
2. Chowdhury Sadid Alam, Saied Zavari, Pouria Nourian, Shengmin Guo, M Shafiqur Rahman, 2024, “Numerical Modeling of Additive Friction Stir Deposition of AA6061-T6 Alloy Using Coupled Eulerian Lagrangian Technique,” Proceedings of Louisiana EPSCoR RII LAMDA 2024 Symposium, Baton Rouge, Louisiana, USA.
3. Abyaz Abid, Hamid Sharifi, Chowdhury Sadid Alam, Pouria Nourian, Collin Wick, M Shafiqur Rahman, 2024, “Integrated Computational Material Engineering Study of Flexural and Tensile Properties of Cu-Ni-Cr Alloy,” Proceedings of Louisiana EPSCoR RII LAMDA 2024 Symposium, Baton Rouge, Louisiana, USA.
4. Chowdhury Sadid Alam, Radif Uddin Ahmed, and M Shafiqur Rahman, 2024, “Fracture Analysis of Additive Friction-Stir Deposited Non-Ferrous and Ferrous Alloys,” Proceedings of Louisiana EPSCoR RII LAMDA 2024 Symposium, Baton Rouge, Louisiana, USA.
5. Radif Uddin Ahmed, Naw Safrin Sattar, and M Shafiqur Rahman, 2023, “Process Analysis of The Friction-Stir Welding Technique Using Machine Learning”, Proceedings of Louisiana EPSCoR RII LAMDA 2023 Symposium, Baton Rouge, Louisiana, USA.
6. Chowdhury Sadid Alam, Saied Zavari, Shengmin Guo, M Shafiqur Rahman, 2023, “Thermo-Mechanical Characterization of Aluminum 6061 Alloy in the Additive Friction-Stir Deposition Process,” Proceedings of Louisiana EPSCoR RII LAMDA 2023 Symposium, Baton Rouge, Louisiana, USA.
7. Chowdhury Sadid Alam, Saied Zavari, Shengmin Guo, M Shafiqur Rahman, 2023, “Tensile and Fatigue Response of Steel Parts Fabricated by Additive Friction-Stir Deposition Process,” Proceedings of Louisiana EPSCoR RII LAMDA 2023 Symposium, Baton Rouge, Louisiana, USA.
8. Mohammad Khairul Habib Pulok, M Shafiqur Rahman, and Uttam K. Chakravarty, “A study of the tensile and fatigue properties of additively manufactured Ti-6Al-4V alloy at high temperatures,” Proceedings of Louisiana EPSCoR RII LAMDA 2021 Symposium; Virtual Conference Baton Rouge, Louisiana, USA: Aug 06, 2021.
9. M Shafiqur Rahman, Congyuan Zeng, Hao Wen, Shengmin Guo, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2020, “An Investigation on the Melting and Solidification Behavior of Ti64 Powder in the Laser Powder-Bed Fusion Process,” Proceedings of Louisiana EPSCoR RII CIMM 2020 Symposium, Baton Rouge, Louisiana, USA: July 20, 2020.
10. M Shafiqur Rahman, Congyuan Zeng, Hao Wen, Shengmin Guo, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2019, “Thermal Behavior and Melt Pool Dynamics in Powder-Bed Fusion-based Additive Manufacturing Process,” Proceedings of Louisiana EPSCoR RII CIMM 2019 Symposium, Baton Rouge, Louisiana, USA: Jun 03, 2019.
11. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2018, “Comparison between Selective Laser Melting and Electron Beam Additive Manufacturing,” Proceedings of Louisiana EPSCoR RII CIMM 2018 Symposium, Baton Rouge, Louisiana, USA: Jul 23, 2018.
12. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2017, “A Computational Fluid Dynamics Approach to Study the Thermal Phenomena in Electron-Beam Additive Manufacturing Process,” Proceedings of Louisiana EPSCoR RII CIMM 2017 Symposium, Baton Rouge, Louisiana, USA: Jul 24, 2017.
13. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2016, “Investigation of Thermo-Fluid Behavior of Ti-6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing,” Proceedings of Louisiana EPSCoR RII CIMM 2016 Symposium, Baton Rouge, Louisiana, USA: Jul 25, 2016.

1. Sifat Abdul Bari, Chowdhury Sadid Alam, Ashfak Siraj Shuvo, Sakib Al Razi Khan, and M Shafiqur Rahman, “Molecular Dynamics Study of Shear-Driven Solidification and High-Temperature Mechanical Properties of Al0.3CoCrFeNi  High Entropy Alloy,” Proceedings of the ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Advanced Manufacturing, IMECE2025-166710, Memphis, TN, USA, Nov 16-20, 2025
2. Ahsanul Alam Kabhi, Pouria Nourian, Md Ashfaq Siddiquee, and M Shafiqur Rahman, 2025, “Effect of Ultrasonic Vibration on the Solid-State Processing of Stainless Steel: An Atomic-Scale Analysis of the Fe-Ni-Cr Ternary System,” Proceedings of the ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Advanced Manufacturing, Memphis, TN, USA, Nov 16-20, 2025.
3. Ahsanul Alam Kabhi, Md Ashfaq Siddiquee, Pouria Nourian, Mahathir M. Bappy, Pratik Sarker, and M Shafiqur Rahman, 2025, “In-Space Manufacturing: An Overview of Current Technologies, Challenges, and Pathways for Sustainable Deep-Space Exploration,” Proceedings of the ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Advanced Manufacturing, Memphis, TN, USA, Nov 16-20, 2025.
4. Nawshin Fairuz Islam, Chowdhury Sadid Alam, Ahsanul Alam Kabhi, Md Ashfaq Siddiquee, Kelly Crittenden, Leland Weiss, and M Shafiqur Rahman, 2025, “Advancing Protective Gears: 3D Printing and Performance Evaluation of Multi- Material Impact-Resistant Shin Guards,” Proceedings of the ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Micro- and Nano-Systems Engineering and Packaging, Memphis, TN, USA, Nov 16-20, 2025.
5. Md Ashfaq Siddiquee, Ahsanul Alam Kabhi, Pouria Nourian, and M Shafiqur Rahman, 2025, “Modeling and Optimization of Additive Friction Stir Deposition for Stainless Steel Using a Coupled Eulerian-Lagrangian Approach,” Proceedings of the ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Advanced Manufacturing, Memphis, TN, USA, Nov 16-20, 2025. [Withdrawn]
6. Md Ashfaq Siddiquee, Ahsanul Alam Kabhi, Dawson Mulkey, Emily Wines, Pouria Nourian, and M Shafiqur Rahman, 2025, “An Investigation of the Ultrasonic Vibration-Assisted Additive Friction Stir Deposition for Next Generation Manufacturing and Repair,” Proceedings of the ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Advanced Manufacturing, Memphis, TN, USA, Nov 16-20, 2025. [Withdrawn]
7. Pouria Nourian, Hamid Sharifi, Ahsanul Alam Kabhi, Md Ashfaq Siddiquee, and M Shafiqur Rahman, 2025, “Optimizing High-Performance Cu-Ni-Cr Alloys for Space Manufacturing Using an Integrated Computational Materials Engineering Approach,” Proceedings of the ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Advanced Manufacturing, Memphis, TN, USA, Nov 16-20, 2025.
8. Iftekhar Riyad and M Shafiqur Rahman, 2025, “Predicting the Strain-Gradient Effect During Deformation of Precipitation Hardened Ti-6al-4v Alloy Using a Mean-Field Polycrystal Plasticity Material Model,” ,” Proceedings of the ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Advanced Manufacturing, Memphis, TN, USA, Nov 16-20, 2025.
9. Chowdhury Sadid Alam, Abyaz Abid, Radif Uddin Ahmed, M Shafiqur Rahman, 2024, “Fracture Analysis of Additive Friction-Stir Deposited Non-Ferrous and Ferrous Alloys,” Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE), Vol. 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging, Portland, OR, USA, Nov 17- 21, 2024.
10. Radif Uddin Ahmed, Iftesam Nabi, Chowdhury Sadid Alam, Yun Chen, M Shafiqur Rahman, 2024, “A Framework for Surface Scanning to Additive Repairing Using Point Cloud Data and Surface Reconstruction Algorithms,” Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE), Vol. 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging, Portland, OR, USA. Nov 17–21, 2024.
11. Radif Uddin Ahmed, Ethan Dowell, Chowdhury Sadid Alam, M Shafiqur Rahman, 2024, “Design and Development of a Desktop 3D Printer for Conformal Additive Manufacturing,” Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE), Vol. 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging, Portland, OR, USA. Nov 17–21, 2024.
12. Abyaz Abid, Hamid Sharifi, Chowdhury Sadid Alam, Radif Uddin Ahmed, Pratik Sarker, Collin Wick, M Shafiqur Rahman, 2024, “Flexural and Tensile Properties of Cu-Ni-Cr Alloy Processed by Solid- State Additive Manufacturing,” Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition, Vol. 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging, Portland, OR, USA. Nov 17–21, 2024.
13. Bianca Fernandez, Pratik Sarker, and M Shafiqur Rahman, 2024, “An Investigation on the Shape Sensitivity of the Electroactive Membrane with Higher-Order Approximation,” Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition, Vol. 10: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging, Portland, OR, USA. V010T13A026, Nov 17–21, 2024.
14. Chowdhury Sadid Alam, Radif Uddin Ahmed, M Shafiqur Rahman, 2023, “Tensile and Fatigue Response of Steel Parts Fabricated by The Additive Friction-Stir Deposition Process,” Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition, Vol. 12: Micro- and Nano-Systems Engineering and Packaging, New Orleans, USA, Oct 29–Nov 2, 2023.
15. Radif Uddin Ahmed, Chowdhury Sadid Alam, M Shafiqur Rahman, 2023, “Application of Machine Learning in Process Analysis of the Friction-Stir Welding Technique,” Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition, Vol. 4: Advanced Materials: Design, Processing, Characterization and Applications; Advances in Aerospace Technology, New Orleans, USA, Oct 29-Nov 2, 2023.
16. M Shafiqur Rahman, Jonathan Ciaccio, and Uttam K. Chakravarty, 2022, “A Machine Learning Approach for Predicting Melt-Pool Dynamics of Ti-6Al-4V Alloy in the Laser Powder-Bed Fusion Process,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol. 4, Advances in Aerospace Technology, Virtual Conference, Nov 1–5, 2021, IMECE2021-71348.
17. M Shafiqur Rahman, Mohammad Khairul Habib Pulok, and Uttam K. Chakravarty, 2022, “Tensile and Fatigue Response of the Laser Powder-Bed Fused Ti-6Al-4V Alloy at High Temperature Conditions,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol. 4, Advances in Aerospace Technology, Virtual Conference, Nov 1–5, 2021, IMECE2021-72043.
18. Mohammad Khairul Habib Pulok, M Shafiqur Rahman, and Uttam K. Chakravarty, 2022, “Crack Propagation and Fracture Toughness of Additively Manufactured Polymers,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol. 4, Advances in Aerospace Technology, Virtual Conference, Nov 1–5, 2021, IMECE2021-72061.
19. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2020, “Heat Transfer and Melt-Pool Evolution During Powder-Bed Fusion of Ti-6Al-4V Parts Under Various Laser Irradiation Conditions,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol. 4, Advances in Aerospace Technology, Portland, OR, USA, Nov 16–19, 2020, IMECE2020-23838, pp. 1-10.
20. M Shafiqur Rahman and Uttam K. Chakravarty, 2020, “Tensile and Fatigue Properties of Ti-6Al-4V Alloy Fabricated by Laser Powder-Bed Fusion Process,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol. 4, Advances in Aerospace Technology, Portland, OR, USA, Nov 16–19, 2020, IMECE2020-23672, pp. 1-9.
21. M Shafiqur Rahman and Uttam K. Chakravarty, 2020, “A Multiband RF Energy Harvesting System for Efficient Power Conversion,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol. 13, Micro- and Nano-Systems Engineering and Packaging, Portland, OR, USA, Nov 16–19, 2020, IMECE2020-23673, pp. 1-7.
22. M Shafiqur Rahman, Pratik Sarker, and Uttam K. Chakravarty, 2019, “A Hybrid Energy Harvester based on Solar Radiation and Mechanical Vibration,” AIP Conference Proceedings, 2121(1), pp. 120008:1-6.
23. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2019, “Thermal Behavior and Melt-Pool Dynamics of Cu-Cr-Zr Alloy in Powder-Bed Selective Laser Melting Process,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Vol. 1, Advances in Aerospace Technology, Salt Lake City, UT, USA, Nov 11–14, 2019, IMECE2019-11581, pp. 1-9.
24. M Shafiqur Rahman and Uttam K. Chakravarty, 2019, “Characterizations of the Paper-Based Microfluidic Devices used for Detecting Fentanyl and Related Synthetic Opioids,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Vol. 1, Advances in Aerospace Technology, Salt Lake City, UT, USA, Nov 11–14, 2019, IMECE2019-11581, pp. 1-9.
25. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2018, “A Comparative Study between Selective Laser Melting and Electron Beam Additive Manufacturing based on Thermal Modeling,” Proceedings of the ASME 2018 International Mechanical Engineering Congress & Exposition (IMECE), Pittsburgh, PA, USA, Nov 09–15, 2018, IMECE2018-86428, pp. 1-12.
26. M Shafiqur Rahman and Uttam K. Chakravarty, 2018, “A Hybrid Energy Harvesting System based on Solar Radiation and Mechanical Vibration,” Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE), Pittsburgh, PA, USA, Nov 09–15, 2018, IMECE 2018-86928, pp. 1-12.
27. M Shafiqur Rahman and Uttam K. Chakravarty, 2018, “Characterizations of Diagnostic Properties and Detection Techniques of Fentanyl and Related Synthetic Opioids,” Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE), Pittsburgh, PA, USA, Nov 09–15, 2018, IMECE2018-87803, pp. 1-10.
28. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2017, “Thermal Analysis of Electron Beam Additive Manufacturing Using Ti-6Al-4V Powder-Bed,” Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition (IMECE), Tampa, FL, USA, Nov 03–09, 2017, IMECE2017-71663, pp. 1-12.
29. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, 2016, “Thermo-Fluid Characterizations of Ti-6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing,” Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition (IMECE), Phoenix, AZ, USA, Nov 11–17, 2016, IMECE2016-65854, pp. 1-9.
30. M Shafiqur Rahman, and Uttam K. Chakravarty, 2015, “An Investigation of a Hybrid Energy Harvester for Efficient Power Generation,” Proceedings of the International Conference on Materials and Manufacturing Engineering (ICMME 2015), Dhaka, Bangladesh, Dec 25–27, 2015, pp. 1-6.
31. M Shafiqur Rahman and Khan Muhammad Golam Kibria, 2014, “Investigation of vibration and ride characteristics of a five degrees of freedom vehicle suspension system,” Procedia Engineering, 90 (2014), pp. 96- 102 (presented in the 10th International Conference on Mechanical Engineering (ICME 2013), Dhaka, Bangladesh).

Invited Talks:

1. M Shafiqur Rahman, 2023, “Effect of Laser Parameters on Melt-Pool Dynamics in the Laser Powder-Bed Fusion Process,” International Summit on Lasers, Optics & Photonics (ISLOP2023), April 24-26, 2023 in Valencia, Spain.
2. M Shafiqur Rahman, 2023, “Diving Into the Additive Manufacturing Research: Trade-offs and Promises,” Faculty Research Seminar Organized by COES Graduate Students Council, LaTech, Feb 16, 2023.
3. M Shafiqur Rahman, and Uttam K. Chakravarty, “A Study on the Microfluidic Behavior of Paper-based Devices for the Detection of Fentanyl and Related Synthetic Opioids,” The 6th Annual Texas STEM Conference; Beaumont, TX 77710, USA: November 3, 2018.
4. M Shafiqur Rahman, “Thermal Analysis of Ti-6Al-4V Melt Pool in Powder-Bed Fusion Additive Manufacturing” 2018 CIMM Student Retreat, Louisiana State University, Baton Rouge, LA, Jun 29, 2018.
5. M Shafiqur Rahman, “Thermal Analysis of Ti-6Al-4V Melt Pool in Powder-Bed Fusion Additive Manufacturing” Advanced Materials Research Institute (AMRI) at UNO, New Orleans, LA, Apr 19, 2018.
6. M Shafiqur Rahman, and Uttam K. Chakravarty, “A hybrid technique of energy scavenging from mechanical vibration and solar radiation” The 3rd Annual Texas STEM Conference; Beaumont, TX 77710, USA: October 3, 2015.

Technical Presentations:

1. M Shafiqur Rahman, “An ICME Framework to Investigate the Scope of Solid-State Additive Manufacturing in Space Manufacturing and Repair Applications,” ASME 2025 International Mechanical Engineering Congress and Exposition (IMECE), Advanced Manufacturing, Memphis, TN, USA, Nov 16- 20, 2025.
2. Nourian, P., Kabhi, A., Siddiquee, M., and Rahman, M., 2025, “An Integrated Computational Material Engineering Approach to Characterize Mechanical Properties of Cu-Ni-Cr Alloys for Advanced Manufacturing,” the 8th World Congress on Integrated Computational Materials Engineering (ICME 2025), Anaheim, CA, Jun 15- 19, 2025.
3. Ethan Dowell and M Shafiqur Rahman, “Methodology for Converting a FDM 3D Printer to a DIW 3D Printer” 13th Annual University of Louisiana System Academic Summit hosted by Louisiana Tech University, Ruston, LA, Apr 11-12, 2024. (Best Presentation Award)
4. M Shafiqur Rahman, 2024, “Additive Friction-Stir Deposition: Process Simulation and Material Characterization,” The 4th LAMDA Frontiers and Technical Conference, Baton Rouge, LA, Feb 09, 2024.
5. Chowdhury Sadid Alam and M Shafiqur Rahman, “Tensile and Fatigue Response of Aluminum Alloy Parts Fabricated by the Additive Friction-Stir Deposition Process”, 4th International Conference on Damage Mechanics (ICDM4), Baton Rouge, USA, May 15-18, 2023.
6. Radif Uddin Ahmed and M Shafiqur Rahman, “Machine Learning Based Process Analysis in the Friction-Stir Welding Process”, 4th International Conference on Damage Mechanics (ICDM4), Baton Rouge, USA, May 15- 18, 2023.
7. Uttam K. Chakravarty, M Shafiqur Rahman, Paul J. Schilling, and Paul D. Herrington, “A Comparative Study Between Selective Laser Melting and Electron Beam Additive Manufacturing based on Melt Pool Dynamics” 2019 CIMM Technical Meeting, Louisiana State University, Baton Rouge, LA, Mar 15, 2019.
8. M Shafiqur Rahman, Pratik Sarker, and Uttam K. Chakravarty, “An Investigation on a Hybrid Energy Harvesting System,” InnovateUNO (The Annual Research Symposium), University of New Orleans, New Orleans, LA 70148: November 7–8, 2018.
9. M Shafiqur Rahman and Uttam K. Chakravarty, “A Hybrid Technique of Energy Harvesting from Mechanical Vibration and Solar Radiation” ASME 2017 International Mechanical Engineering Congress and Exposition, Tampa, Florida, USA: November 3–9, 2017.
10. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “A Computational Fluid Dynamics Approach to Study the Thermal Phenomena in Electron-Beam Additive Manufacturing Process” 2017 CIMM Student Retreat, UNO, New Orleans, LA, Jul 19, 2017.
11. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “Thermo-Fluid Behavior of Ti-6al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing” 2017 CIMM Technical Meeting, Louisiana State University, Baton Rouge, LA, Feb 06, 2017.

1. Chowdhury Sadid Alam, Abyaz Abid, and M Shafiqur Rahman, 2024, “Design and Mechanical Characterization of Additively Manufactured Protective Sports Gears,” 2024 COES Graduate Student Symposium, Louisiana Tech University, Ruston, LA.
2. Radif Uddin Ahmed and M Shafiqur Rahman, 2023, “A Machine Learning Analysis for Optimizing Critical Parameters in the Friction Stir Welding Process,” 2023 COES Graduate Student Symposium, Louisiana Tech University, Ruston, LA.
3. Chowdhury sadid Alam and M Shafiqur Rahman, 2023, “Thermo-Mechanical Characterization of Aluminum Alloy in the Additive Friction-Stir Deposition Process,” 2023 COES Graduate Student Symposium, Louisiana Tech University, Ruston, LA, Apr 14, 2023.(Best Poster Award, 2nd Place)
4. M Shafiqur Rahman, “Melt-Pool Dynamics of Ti-6Al-4V Alloy in the Laser Powder-Bed Fusion Process,” The 8th Annual Johns Hopkins Postdoctoral Conference, Baltimore, MD, April 28, 2022.
5. M Shafiqur Rahman, Congyuan Zeng, Hao Wen, Shengmin Guo, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “Melting and Solidification Behavior of Ti64 Powder in the Laser Powder-Bed Fusion Process,” 2020 CIMM Symposium, Louisiana State University, Baton Rouge, LA, July 20, 2020. (Best Poster Award: 3rd Place).
6. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “Powder-Bed Fusion Process of Cu-Cr-Zr Alloy: Melt-Pool Dynamics and Process Optimization,” ASME 2019 International Mechanical Engineering Congress and Exposition, Track 16-1, NSF Student Poster Competition, Salt Lake City, UT, Nov 1114, 2019.
7. M Shafiqur Rahman, Congyuan Zeng, Hao Wen, Shengmin Guo, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “Thermal Behavior and Melt Pool Dynamics in Powder Bed Fusion Additive Manufacturing Process,” 2019 CIMM Symposium, Louisiana State University, Baton Rouge, LA, Jun 03, 2019 (Placed among the top five posters).
8. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “A Comparative Study between Selective Laser Melting and Electron Beam Additive Manufacturing Processes,” ASME 2019 International Mechanical Engineering Education (MEED) Leadership Summit, New Orleans, LA, Mar 2023, 2019.
9. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “A Comparative Study on Selective Laser Melting and Electron Beam Additive Manufacturing Processes,” ASME 2018 IMECE Track 15 NSF Student Poster Competition, Pittsburgh, PA, Nov 14, 2018.
10. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “Comparison between Selective Laser Melting and Electron Beam Additive Manufacturing,” 2018 CIMM Symposium, Louisiana State University, Baton Rouge, LA, Jul 23, 2018 (Best Poster Award, 3rd Place).
11. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “Thermal Analyses of Electron Beam Additive Manufacturing using Ti-6Al-4V Powder,” 2017 CIMM Symposium, Louisiana State University, Baton Rouge, LA, Jul 24, 2017.
12. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “Simulation of The Electron Beam Additive Manufacturing Using Ti-6Al-4V Powder-Bed,” 2016CIMM Symposium, Louisiana State University, Baton Rouge, LA, Jul 25, 2016.
13. M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington, and Uttam K. Chakravarty, “Characterizations of Thermo-Fluid Behavior of Ti-6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing,” 2016 CIMM Technical Meeting, Louisiana State University, Baton Rouge, LA, Apr 08, 2016.